Replacement power for your Milagrow robot vacuum
The BATTERYWORKS 14.4V 5200mAh rechargeable lithium-ion battery is a replacement option for compatible Milagrow iMap 10 and iMap 10 Nano robot vacuum cleaners. With a 5.2Ah capacity and 74.88Wh energy rating, it provides power for everyday robotic cleaning when an ageing compatible battery needs replacing. Actual runtime depends on the vacuum's settings, floor conditions and battery condition.
Rechargeable 18650 lithium-ion cells
Built using rechargeable 18650 Li-ion cells, this battery pack combines a 14.4V nominal voltage with 5200mAh capacity. The pack label specifies a maximum charging voltage of 16.6V.
Built-in BMS protection
The integrated Battery Management System is designed to provide:
- Short-circuit protection
- Over-current protection
- Over-charge protection
- Overheating protection
- Over-voltage protection
- Over-discharge protection
Specifications
- Brand: BATTERYWORKS
- Battery model: BW-14.4-5200-1
- Battery type: rechargeable lithium-ion (Li-ion)
- Cell type: 18650 Li-ion cells
- Nominal voltage: 14.4V DC
- Battery capacity: 5200mAh (5.2Ah)
- Energy capacity: 74.88Wh
- Maximum charging voltage: 16.6V, as printed on the battery label
- Compatible brand: Milagrow
- Compatible models: iMap 10 and iMap 10 Nano
- Recommended use: robot vacuum cleaner
- Battery dimensions: approximately 134 × 50 × 50 mm
- Battery weight: approximately 385 g
- Connector: 2-wire battery connector
- Net quantity: 1 battery pack
- Country of origin: India
Important compatibility note
Before ordering, compare your original battery's voltage, connector type, connector polarity, battery dimensions and vacuum model with this battery. Similar-looking connectors or vacuum models may use different battery configurations. Purchase only when the specifications match your original battery. This is a replacement battery, not a Milagrow-branded original battery.
Safe use and care
Use only with a compatible vacuum and charging system suitable for this battery's specifications. Do not short-circuit, puncture, disassemble or expose the pack to fire or water. Stop using the battery if it becomes damaged, swollen or unusually hot. BMS protection does not replace correct installation and safe handling.
